Operating mode and precautions of egg sheller machine_LIJUN Machinery Plant

welcome to visit Egg breaker machine | LIJUN Machinery Plant website!

Hotline:+8615961008651

Operating mode and precautions of egg sheller machine

Date:2020-9-17      Author:Egg washing machine

The egg sheller has two vibration modes: a vertical vibration motor and an ordinary motor to drive the vibration exciter. The upper and lower ends of the vibration source are equipped with eccentric weights. The heavy hammers at the lower ends have different configurations. When the excitation source rotates, it produces horizontal, vertical, and inclined three-dimensional motion, and then transmits this motion to the screen surface. Adjusting the phase angle of the upper and lower ends can change the movement trajectory of the material on the screen surface to achieve the purpose of fine screening.

Egg Peeling Machine

Before starting up, you should remove the bottom screen ring, remove the transport screw and wood; carefully check the lubrication of the vibration motor, coupling, vibrator, and other parts; check the fasteners of the egg sheller, if you find loose, you should take care of it in time Fasten;

Regularly check the joints and fasteners of the various parts of the egg sheller. If loose, they should be tightened in time to avoid loud noise, damage to the machine parts, and even screws and other foreign objects falling into the material due to the long-term vibration of the equipment. The occurrence of moderate conditions; the vibration motor should run in a clockwise direction;

Ensure that the materials enter the egg sheller evenly to ensure screening accuracy and output; when screening dry materials, hoses or canvas sleeves should be connected to the inlet and outlet devices to prevent leakage or dust spills. The problem;

The slurry screening and filtration usually use a single-layer double-outlet egg sheller, and the pressure is reduced through the buffer to the stable center of the screen. The slurry supply should be evenly adjusted to avoid affecting the screening effect. The deceleration and pressure reduction control method of the slurry volume is recommended to use the level tank of the overflow pipe to the buffer through the valve;

During the working process of the egg shelling machine, if there is an abnormal sound, it should be shut down for inspection immediately, and the production should be started after troubleshooting;

After the feeding is finished, let the equipment continue to run for about 5 minutes, so that the screen and the bottom of the screen are completely drained, to prevent the residual material from reversing moisture, affecting the screening effect, or changing the material and the number of meshes that cause mixing problems; screening work After the end, clean the egg sheller equipment.