﻿﻿ ﻿ How to Solve the Deviation of the Conveyor Belt of the Egg Washing Machine?_LIJUN Machinery Plant

welcome to visit Egg breaker machine | LIJUN Machinery Plant website！

Hotline:+8615961008651
• ##### Message
Current position ：
1. Egg breaker &separator, Egg cleaning machine, egg cracking/knocking machine
2. News about egg washing machines and egg breaker
3. How to Solve the Deviation of the Conveyor Belt of the Egg Washing Machine?

# How to Solve the Deviation of the Conveyor Belt of the Egg Washing Machine?

Date：2020-9-7      Author：Egg washing machine

Generally, the eggs are not centered on the cross-section of the conveyor belt, which will cause the conveyor belt to run off. During the use of the egg washing machine, the conveyor belt used to transport the eggs will always runoff, which is one of its common faults.

The misalignment between the horizontal centerline of the roller and the longitudinal centerline of the belt conveyor: If the value of the misalignment exceeds 3mm, it should be adjusted by the elongated mounting holes on both sides of the roller set. The specific method is which side of the conveyor belt is biased, which side of the roller group moves forward in the direction of the conveyor belt, or the other side moves backward.

Due to the deviation of the two planes of the head and tail frame mounting bearing seats: if the deviation of the two planes is greater than 1mm, the two planes should be adjusted in the same plane.

The adjustment method of the head roller is: if the conveyor belt deviates to the right side of the roller, the bearing seat on the right side of the roller should move forward or the left bearing seat should move backward; if the conveyor belt deviates to the left side of the roller, then The bearing seat on the left side of the drum should move forward or the bearing seat on the right side should move backward. The adjustment method of the tail roller is just the opposite of that of the head roller.

When you find that your egg cleaning machine is off-track, you can first check whether it is caused by the following problems: when the self-aligning roller is not flexible or is tilted and fixed, the surface of the roller is not clean enough, or the external environment, etc. And so on, can cause the conveyor belt to deviate. Check one by one, I believe you will find the reason soon.

In general, it is rare for the conveyor belt to deviate due to the problem of the conveyor belt itself, and the main reason for the deviation of the conveyor belt is the conveyor. Due to the non-parallel rollers, non-vertical brackets, and inflexible rotation of the rollers, the conveyor belt can deviate.

For relatively short conveyor belts, due to the inflexible rotation of the single-sided rollers and other factors, the possibility of deviation of the conveyor belt is relatively high. For the long conveyor belt, due to the increase in the number of rollers, the single asymmetry of the side effect will be reduced, so the deviation phenomenon shown on the conveyor belt will be less.

﻿